Every price we publish, in one place. Six machines, the deposit on each, and the amount you would actually finance. No "contact us for pricing" on the machines themselves.
LaserStrip machines run from £6,650 + VAT for the 200W to £73,400 + VAT for the 2000W. The 300W is £7,800 and the 500W, the model most commercial operators buy, is £16,900. All prices exclude VAT, freight, import charges and UK mainland delivery, which are quoted at the point of purchase.
Most suppliers in this market make you ask. We would rather you knew before you spent time on a call, partly because it is a better use of your afternoon and partly because the people for whom the number is wrong should find that out now rather than three conversations in.
| Model | Price (ex VAT) | Deposit | Amount financed |
|---|---|---|---|
| 200W entry | £6,650 | £500 | £6,150 |
| 300W control and detail work | £7,800 | £500 | £7,300 |
| 500W our main commercial machine | £16,900 | £1,000 | £15,900 |
| 1000W | £30,900 | £2,000 | £28,900 |
| 1500W | £51,300 | £2,500 | £48,800 |
| 2000W | £73,400 | £3,000 | £70,400 |
The deposit is payable to reserve the build slot. The amount financed is the balance a lender would fund, which matters if you are a sole trader: see the eligibility note below.
Higher pulse-energy configurations cost slightly more on some models. The 300W is £8,000 at 15 mJ, the 500W is £17,000 at 5 or 15 mJ, the 1000W is £31,000 at 50 mJ, the 1500W is £52,300 at 50 mJ and the 2000W is £75,300 at 50 mJ. Which configuration suits the work is a question worth asking before you order, because it is not always the higher number. Full specifications are on each machine page.
You do not need the full amount in the bank. Finance is arranged through an FCA-regulated broker and LaserStrip is not a lender. A limited company can be funded on any machine in the range. A sole trader can only be funded where the amount borrowed is more than £25,000, and the deposit does not count towards that figure, which is why the 200W, 300W and 500W cannot be financed by a sole trader on their own. That is not us being awkward: a business-purpose credit agreement above £25,000 is an exempt agreement under section 16B of the Consumer Credit Act 1974, and below that line the agreement becomes regulated consumer credit that this lender panel does not write. Check whether you qualify.
Hire rates are quoted on enquiry rather than published, because the rate depends on the model, the term and the delivery distance, and a published headline rate would be wrong for most people reading it. What we can tell you up front is the structure: hire starts at a one-week minimum, runs on weekly or monthly terms, and delivery, collection and handover are charged separately from the hire rate. Hire charges may be credited against a purchase, subject to the terms agreed at the point of enquiry. Full detail is on the machine hire page.
The three Business Launch tiers are priced on application. It is a separately purchased twelve-month package covering website and SEO, cold email, Meta and Google advertising setup, LinkedIn campaigns, sales support and strategy, plus LSO certification, training and ongoing UK support. It is bought separately from the machine and its finance, it is entirely optional, and it does not guarantee work, revenue or business success. See what is included.
Applications
The same machines, priced the same, framed for the job you are quoting.
Which machine
The 500W where throughput sets your day rate, the 300W where control matters more than coverage. Tell us the work and we will point at one.
All prices exclude VAT, freight, import charges and UK mainland delivery, which are quoted at the point of purchase.
Machine finance is available to UK businesses through an FCA-regulated broker. Limited companies can be funded on any machine; sole traders only above £25,000. Check whether you qualify → LaserStrip is not a lender. See also the Business Launch package.
Further reading
Standards and guidance
A pulsed fibre laser is a Class 4 device. These are the primary UK sources, linked so you can read them rather than take our word for it. Our own measured results, including the combinations that did not work, are in the surface ablation database.
Common questions
From £6,650 + VAT for the 200W up to £73,400 + VAT for the 2000W. The 300W is £7,800 and the 500W is £16,900. All prices exclude VAT, freight, import charges and UK mainland delivery, which are quoted at the point of purchase.
Because the alternative wastes everybody's time. If the number is wrong for you, the most useful thing we can do is let you find that out in thirty seconds rather than after three conversations. It also means the price you see is the price we quote, rather than one that moves depending on how keen you sound.
The 200W at £6,650 + VAT. It is a genuine machine rather than a stripped-down one, and it is the right answer for light, precise work at modest volume. It is the wrong answer if you are quoting structural steel or large areas, and we will say so rather than sell you one.
Finance is available to UK businesses through an FCA-regulated broker, subject to status. A limited company can be funded on any machine. A sole trader can only be funded above £25,000 borrowed, which rules out the 200W, 300W and 500W on their own. Monthly figures depend on term, deposit and the lender's decision, so we will not quote a headline monthly number that turns out not to be yours.
No, but there are things outside it, which is not the same thing. VAT, freight, import charges and UK mainland delivery are all excluded and quoted separately. Your own insurance, van, filters and time are yours. We would rather list those here than have you discover them on the invoice.
Quoted on enquiry, because it depends on the model, the term and the delivery distance. The structure is fixed and published: one-week minimum, weekly or monthly terms, with delivery, collection and handover charged separately from the hire rate.
They are reviewed rather than fixed forever, and freight and import costs move. The prices on this page are the current published retail prices and this is the page we update first. A written quotation is what binds.
Application enquiry
Tell us what you are trying to remove and what is underneath it. We will tell you honestly whether a laser is the right tool, where it would sit in your existing process, and which machine would suit. If conventional preparation is the better answer for your job, we will say so.
We reply within one business day. Your details are never shared.