LaserStrip 300W
Pulsed Fibre Laser.

Q: How much does the LaserStrip 300W Pulsed Fibre Laser cost?

The 300W starts from £7,800, with the exact figure set by the pulse-energy configuration you choose (2 mJ, 5 mJ, 15 mJ). See the pricing table above for every option. Prices are in GBP and exclude VAT, international freight, import charges, customs clearance and UK mainland delivery, which are quoted in real time at the point of purchase. Every machine includes professional configuration, hands-on training, full safety documentation and UK technical support.

The all-rounder. The best balance of speed and finesse, and the model that comfortably covers all seven LaserStrip revenue streams.

From £7,800 (ex freight & delivery)

In stock, built to order · typically two to eight weeks from enquiry to operational

Reserve your 300W → Finance options → 07973 106612

300 W

Output Power

1064 nm

Wavelength

Air

Cooled

45 kg

Weight

Technical specification

LaserStrip
300W Pulsed Fibre Laser

The 300W is our best seller for a reason: it is fast enough for production work yet controlled enough for heritage and detailing, so a single machine covers the full range of seven services. For most operators building a laser cleaning business, this is the machine that pays back fastest because there is almost no job it has to turn away.

Laser SourcePulsed fibre (MOPA)

Output Power300 W

Wavelength1064 nm

Pulse Width30 – 500 ns

Pulse Frequency1 – 4000 kHz

Max Pulse EnergyUp to 15 mJ

Scan FieldUp to 120 × 120 mm

Cleaning GunHandheld, 1.3 kg

Fibre Cable10 m

CoolingAir-cooled, self-contained

Power Supply220V 50/60Hz, single-phase

Weight≈ 45 kg

Footprint (W×D×H)≈ 580 × 250 × 540 mm

Safety ClassClass 4

Lens, cable length and pulse-energy options vary by configuration. Exact figures confirmed on enquiry.

Class 4 laser use at work is governed by the Control of Artificial Optical Radiation at Work Regulations 2010. See also HSE guidance on non-ionising radiation. Every machine ships with the safety documentation and signage those duties require.

LaserStrip 300W Pulsed Fibre Laser pulsed fibre laser cleaning machine

What's included

More Than Just
the Machine

LaserStrip 300W Pulsed Fibre Laser, fully assembled and tested
Professional mobile, van-ready configuration
Hands-on operational training at our Leeds studio
Full laser safety documentation and compliance pack
UK-based technical support after purchase
Operator manual, maintenance schedule, PPE kit and signage

Reserve your 300W →

Machine pricing

LaserStrip 300W Pricing

Choose the pulse energy that matches your work. Every 300W machine ships with training, safety documentation, aftercare and UK support. Prices in GBP.

Pulse Energy

2 mJ

£7,800

300W pulsed fibre laser

Reserve →

What the 300W Is Built For

Every LaserStrip machine unlocks seven revenue streams. The 300W is strongest on the work below. See all seven services.

Who the 300W is for

The 300W is the machine for owner-operators building a dedicated laser cleaning business. It is powerful enough for commercial graffiti, heritage and rust work, yet controlled enough for delicate detailing, so you rarely have to turn a job away or sub it out.

Typical 300W jobs

In a typical week a 300W might strip kitchen doors on Monday, clear graffiti from a shopfront on Tuesday, clean a sandstone porch midweek and de-rust a run of railings on Friday. That versatility, seven revenue streams from a single machine, is exactly why it is our best seller and the model most operators settle on.

Graffiti Removal

Complete removal from brick, stone, concrete and metal. No chemicals. Emergency same-day deployment available.

Heritage Stone Cleaning

BS 8221-1:2012 compliant. Listed buildings and conservation masonry treated with precision.

Rust & Paint Removal

Complete corrosion removal from metal and steel, left clean and coating-ready. No grinding required.

✓All seven LaserStrip revenue streams from one machine
✓Graffiti removal on brick, stone and render
✓Heritage stone and Victorian sandstone
✓Rust and paint removal from metal
✓The best all-round balance of speed and finesse

Compare the range

Six Power Levels, One Lineup

Every model shares the same pulsed fibre technology, training and UK support. The difference is removal speed and the scale of work it suits.

200W

200W Pulsed Fibre Laser

Precision & entry-level. The most portable and affordable way to start.

View the 200W →

300W

LaserStrip pulsed fibre laser cleaning machine range: specification comparison
Model	Output	Max pulse energy	Weight	Removal speed	Best for
LaserStrip 200W	200 W	Up to 5 mJ	≈ 38 kg	Controlled	Precision & entry-level. The most portable and affordable way to start.
LaserStrip 300W	300 W	Up to 15 mJ	≈ 45 kg	Fast	The most popular choice. Handles every job most operators meet, day to day.
LaserStrip 500W	500 W	Up to 15 mJ	50 kg	High	Heavy-duty production for larger surfaces and commercial contracts.
LaserStrip 1000W	1000 W	Up to 50 mJ	≈ 75 kg	Very high	Industrial power for the heaviest large-area contracts.
LaserStrip 1500W	1500 W	Up to 50 mJ	≈ 95 kg	Very high	Very heavy industrial production for the largest contracts.
LaserStrip 2000W	2000 W	Up to 50 mJ	≈ 120 kg	Maximum	The absolute maximum removal rate, for the heaviest work at scale.

Laser, or the method you use now?

The 300W only makes sense if it beats what you already do. Here is the honest comparison, including the jobs where it does not.

How laser cleaning compares with abrasive blasting, dry ice blasting and chemical stripping
Method	How it behaves	Laser instead	When it still wins
Abrasive blasting Read the comparison →	Erodes the surface itself, and can damage soft stone, thin metal and fine detail. Lower entry cost, but ongoing bills for media, containment and disposal.	Non-contact, and removes only the contaminant. Runs on electricity, with no media to buy, contain or dispose of.	Very large, rough, robust surfaces where there is no damage risk.
Dry ice blasting Read the comparison →	Leaves no media on the floor, but the pellets cannot be stored: a delivery loses mass by the hour and is usually gone within a day or two.	No consumable to reorder, store, or run out of mid-job. A tuned pulsed laser stops exactly at the clean layer.	Work where CO2 supply is already on site and surface control is not critical.
Chemical stripping Read the comparison →	Softens coatings with solvents over time, bringing fumes, protective controls and waste that has to be disposed of correctly.	Lifts paint with light. No solvents, no soaking, no residue to rinse or neutralise.	Small, intricate parts that fit fully inside a dip tank.

Still weighing it up? Hire a machine first and put it on your own work before committing. On monthly agreements the hire fees come off a later purchase.

Applications

What the 300W is used for

Beyond cleaning, this machine is specified for laser ablation and surface preparation: removing coatings, oxides and contamination as a preparation step before painting, coating, welding and bonding. These guides cover where it fits and where it does not.

Professional refinishing Where a laser fits into a refinishing process, and where conventional preparation still wins. Read more → Paint and varnish on wood Timber, furniture and joinery, with the substrate caveats stated plainly. Read more → Staircases and joinery Spindles, newel posts and mouldings, the slowest hand-stripping job there is. Read more → Automotive restoration Chassis, castings, brackets and weld prep, as precision work rather than shell stripping. Read more → Laser ablation and surface preparation The main guide: what ablation is, what decides whether it works, and how it compares to sanding, blasting and chemical stripping. Read more →

Not sure whether your application suits a laser? Tell us what you are trying to remove and what is underneath it and we will give you a straight answer, including when conventional preparation is the better call.

The 300W machine

Frequently Asked Questions

How much does the LaserStrip 300W Pulsed Fibre Laser cost?+

The 300W starts from £7,800, with the exact figure set by the pulse-energy configuration you choose (2 mJ, 5 mJ, 15 mJ). See the pricing table above for every option. Prices are in GBP and exclude VAT, international freight, import charges, customs clearance and UK mainland delivery, which are quoted in real time at the point of purchase. Every machine includes professional configuration, hands-on training, full safety documentation and UK technical support.

Is the 300W the right power for my work?+

What can I clean with the 300W?+

A pulsed fibre laser is non-abrasive and chemical-free, so it lifts contaminants without touching the substrate underneath. The 300W is suited to all seven laserstrip revenue streams from one machine, graffiti removal on brick, stone and render, heritage stone and victorian sandstone and more. See the full range on our laser cleaning services page.

Do I need experience to operate it?+

No. Every purchase includes hands-on training at our Leeds studio covering laser safety, operation, quoting and commercial work. You leave ready to earn, taught by operators who use these machines commercially every day.

Where do you deliver?+

We deliver nationwide and cover the whole of Yorkshire as standard. See our Yorkshire areas page. Training and handover take place at our Leeds studio.

Should I buy the 300W or hire one first?+

If you plan to trade long term, buying outright pays back fastest. If you want to test demand first, hiring a laser machine is the lower-risk start, and hire fees can be offset against a later purchase.

300W enquiry

Get 300W Pricing
& Availability.

Fill in the form and we'll send you full pricing, specification and availability for the LaserStrip 300W Pulsed Fibre Laser. No obligation.

Phone

07973 106612

hello@laserstrip.co.uk

Response

Within one business day

We respond within one business day. Your details are never shared.

Reserve your machine

LaserStrip 300W

Step 1 · Choose configuration

Step 2 · What you pay today

Deposit today

Balance, invoiced later

The deposit is fully refundable and comes off the final price. Freight, import charges and UK delivery are quoted separately. We confirm your specification by phone within one business day, then invoice the balance. Nothing ships until you approve that invoice.

Step 3 · Secure payment

Secure checkout by Stripe. Card details never touch our servers.

LaserStrip 300WPulsed Fibre Laser.

LaserStrip300W Pulsed Fibre Laser

More Than Justthe Machine