LaserStrip 2000W · pulsed fibre (MOPA), 1064nm
2000W Laser
Cleaning Machine UK.
The top of the range. The maximum removal rate we offer, for the heaviest industrial, marine and infrastructure contracts at scale.
- Refundable deposit £3,000, deducted from the balance
- Pulse energy options: 15 mJ (£73,400), 50 mJ (£75,300)
- Hands-on training at handover, safety documentation and UK technical support included
Bought by phone and online: recommendation, written quote, refundable deposit, delivery with training. No demonstration or visit to Leeds needed. See all laser cleaning machine prices or compare all six laser cleaning machines for sale.
Photograph shows the LaserStrip 500W, representative of the range.
Technical specification
LaserStrip
2000W Pulsed Fibre Laser
The LaserStrip 2000W is a 2000 watt pulsed fibre (MOPA) laser cleaning machine with a handheld cleaning gun, priced from £73,400 ex VAT. It removes rust, paint, coatings and graffiti with no chemicals or blast media, runs air-cooled, and is built to order in two to eight weeks with operational training at handover.
The 2000W is the most powerful machine in the LaserStrip range. Where the 1500W is fast, the 2000W is uncompromising: it delivers the highest removal rate we offer for the largest surfaces, thickest coatings and heaviest corrosion. It is specified where square-metres-per-hour is the single number that decides whether a large industrial or infrastructure tender is profitable. It is a pulsed fibre laser, not a continuous-wave one, so it removes coatings in short, high-energy pulses rather than a constant beam.
Lens, cable length and pulse-energy options vary by configuration. Exact figures confirmed on enquiry.
Class 4 laser use at work is governed by the Control of Artificial Optical Radiation at Work Regulations 2010. See also HSE guidance on non-ionising radiation. Every machine ships with the safety documentation and signage those duties require.
Photograph shows the LaserStrip 500W, representative of the range. The 2000W's weight and footprint are in the specification table.
What's included
More Than Just
the Machine
- LaserStrip 2000W Pulsed Fibre Laser, fully assembled and tested
- Professional mobile, van-ready configuration
- Hands-on operational training, included with the machine
- Full laser safety documentation and compliance pack
- UK-based technical support after purchase
- Operator manual, maintenance schedule, PPE kit and signage
Machine pricing
LaserStrip 2000W Pricing
Choose the pulse energy that matches your work. Every 2000W machine ships with training, safety documentation, aftercare and UK support. Prices in GBP.
All prices are shown in GBP (£) and exclude VAT, international freight, import charges, customs clearance (where applicable) and UK mainland delivery. Freight and delivery costs fluctuate, so all shipping and delivery charges are quoted in real time at the point of purchase. The VAT treatment that applies to your order is confirmed in writing before any payment beyond the refundable deposit. Request a full quote →
Business finance is available through an FCA-regulated broker, limited companies on any machine, sole traders above £25,000. Check if you qualify for laser cleaning machine finance →
See the full laser cleaning machine price list, or compare all six machines.
Commercial finance available subject to approval
Spread the Cost of Your LaserStrip 2000W
A limited company does not need £73,400 in the bank. Business finance is arranged through an FCA-regulated broker, subject to status and lender criteria. LaserStrip is not a lender.
A limited company or a sole trader can be funded on the 2000W.
Best suited to
What the 2000W Is Built For
Every LaserStrip machine covers the seven applications on our services page. The 2000W is strongest on the work below. See all seven applications.
Who the 2000W is for
The 2000W is for the largest industrial and infrastructure operators, where square-metres-per-hour is the single number that decides a tender. It is the most powerful machine we supply, specified for the heaviest work at scale.
Typical 2000W jobs
Typical 2000W work is major marine, plant and infrastructure de-rusting and coating removal on the largest surfaces. It delivers the maximum removal rate in the range, stripping the thickest coatings and heaviest corrosion in a single confident pass.
- ✓The maximum removal rate and throughput we offer
- ✓The largest structural, marine and plant surfaces
- ✓Thickest coatings and heaviest mill scale
- ✓Major infrastructure and industrial contracts
- ✓Operators running the highest-volume large-area work
Compare the range
Six Power Levels, One Lineup
Every model shares the same pulsed fibre technology, training and UK support. The difference is removal speed and the scale of work it suits.
| Model | Output | Max pulse energy | Weight | Removal speed | Best for |
|---|---|---|---|---|---|
| LaserStrip 200W | 200 W | Up to 5 mJ | ≈ 38 kg | Controlled | Precision & entry-level. The most portable and affordable way to start. |
| LaserStrip 300W | 300 W | Up to 15 mJ | ≈ 45 kg | Fast | Control over coverage. Detail-led and lighter commercial work. |
| LaserStrip 500W | 500 W | Up to 15 mJ | 50 kg | High | Our main commercial machine. Recommended for most businesses selling laser cleaning. |
| LaserStrip 1000W | 1000 W | Up to 50 mJ | ≈ 75 kg | Very high | Industrial power for the heaviest large-area contracts. |
| LaserStrip 1500W | 1500 W | Up to 50 mJ | ≈ 95 kg | Very high | Very heavy industrial production for the largest contracts. |
| LaserStrip 2000W | 2000 W | Up to 50 mJ | ≈ 120 kg | Maximum | The absolute maximum removal rate, for the heaviest work at scale. |
Optional add-on
Buying the machine
is only half the equation.
The other half is generating commercially viable work. LaserStrip Business Launch is an optional commercial launch package: your brand, website and Google Business Profile, a configured CRM with follow up automation (LaserStrip Launch OS), territory research, sales templates, outbound setup, and sales and CRM training alongside the machine handover.
It is bought separately from the machine, it is entirely optional, and it does not guarantee work, revenue or business success. Starting from scratch? Read our guide to how to start a laser cleaning business in the UK.
See what is includedBefore you choose
Laser, or the method you use now?
The 2000W only makes sense if it beats what you already do. Here is the honest comparison, including the jobs where it does not.
| Method | How it behaves | Laser instead | When it still wins |
|---|---|---|---|
| Abrasive blasting Read the comparison → |
Erodes the surface itself, and can damage soft stone, thin metal and fine detail. Lower entry cost, but ongoing bills for media, containment and disposal. | Non-contact, and removes only the contaminant. Runs on electricity, with no media to buy, contain or dispose of. | Very large, rough, robust surfaces where there is no damage risk. |
| Dry ice blasting Read the comparison → |
Leaves no media on the floor, but the pellets cannot be stored: a delivery loses mass by the hour and is usually gone within a day or two. | No consumable to reorder, store, or run out of mid-job. A tuned pulsed laser stops exactly at the clean layer. | Work where CO2 supply is already on site and surface control is not critical. |
| Chemical stripping Read the comparison → |
Softens coatings with solvents over time, bringing fumes, protective controls and waste that has to be disposed of correctly. | Lifts paint with light. No solvents, no soaking, no residue to rinse or neutralise. | Small, intricate parts that fit fully inside a dip tank. |
Still weighing it up? Speak to sales on 07973 106612 and we will tell you honestly where a laser sits against the method you use now, then quote the 2000W if it is the right call.
Applications
What the 2000W is used for
Beyond cleaning, this machine is specified for laser ablation and surface preparation: removing coatings, oxides and contamination as a preparation step before painting, coating, welding and bonding. These guides cover where it fits and where it does not.
Not sure whether your application suits a laser? Tell us what you are trying to remove and what is underneath it and we will give you a straight answer, including when conventional preparation is the better call.
The 2000W machine
Frequently Asked Questions
How much does the LaserStrip 2000W Pulsed Fibre Laser cost?+
The 2000W starts from £73,400, with the exact figure set by the pulse-energy configuration you choose (15 mJ, 50 mJ). See the pricing table above for every option. Prices are in GBP and exclude VAT, international freight, import charges, customs clearance and UK mainland delivery, which are quoted in real time at the point of purchase. Every machine includes professional configuration, hands-on training, full safety documentation and UK technical support.
Is the 2000W the right power for my work?+
The 2000W is the most powerful machine in the LaserStrip range. Where the 1500W is fast, the 2000W is uncompromising: it delivers the highest removal rate we offer for the largest surfaces, thickest coatings and heaviest corrosion. It is specified where square-metres-per-hour is the single number that decides whether a large industrial or infrastructure tender is profitable. It is a pulsed fibre laser, not a continuous-wave one, so it removes coatings in short, high-energy pulses rather than a constant beam. Not sure? Tell us the jobs you want to win and we will recommend the right model from the 200W to 2000W range. For most businesses selling laser cleaning that is the 500W.
What can I clean with the 2000W?+
A pulsed fibre laser is non-abrasive and chemical-free, so it lifts contaminants without touching the substrate underneath. The 2000W is suited to the maximum removal rate and throughput we offer, the largest structural, marine and plant surfaces, thickest coatings and heaviest mill scale and more. See the applications below, or all seven applications.
Do I need experience to operate it?+
No. Every purchase includes hands-on operational training covering laser safety, operation, quoting and commercial work, delivered at handover by people who configure and support these machines. It is initial operational training rather than an external qualification: responsibility for your own risk assessments, RAMS, site controls, competent operation, insurance and health and safety duties remains yours.
Where do you deliver?+
We deliver across the UK mainland; delivery is quoted for your postcode on the written quotation. Training and handover are included with delivery, so you do not need to travel to Leeds.
How do I buy the 2000W, and do I need to see it first?+
Buying is a direct process by phone and email: tell us the work, we confirm the 2000W is the right power, send a written quotation for your configuration and delivery address, you reserve it with a refundable deposit, and the balance is invoiced before dispatch. Business finance can spread the cost. No demonstration, sample test or visit to Leeds is needed; the machine arrives with training. Hire is for a defined project, not a step before buying.
2000W enquiry
Buy Your 2000W
Laser Cleaning Machine.
Tell us the work and we will confirm the configuration, then send a written quotation with pricing, delivery and the finance position for the LaserStrip 2000W Pulsed Fibre Laser, within one business day. Buy from the quote by phone or online. No obligation.
We respond within one business day. Your details are never shared.
Buy your machine
LaserStrip 2000W
Where should we send your quote?
So a person can come back to you with the machine, the price and delivery to your postcode. Used for your quote only, never passed to marketing lists.
The work
What are you mainly removing?
What are you working on most often?
How much of a typical week is this work?
Your business
Your situation
How would you trade or buy?
How would you fund it?
When do you want it?
Business Launch (optional add-on, you can skip this)
An optional launch package: your brand and website, a configured CRM with follow up automation (LaserStrip Launch OS), territory research, sales templates, outbound setup and launch training. It does not guarantee work, revenue or business success. What is included →
Configuration and how to proceed
Pulse-energy configuration
Not sure which? Keep the first and we confirm the configuration for your application on the quote; nothing is charged beyond the refundable deposit until you approve it.
Prices exclude VAT, freight, import charges and UK delivery, which are quoted for your postcode. Either way we come back within one business day to confirm the configuration for your application; nothing ships until you approve the invoice.
Fully refundable, comes off the final price. Secure checkout by Stripe; card details never touch our servers.
A written quotation for this configuration and your delivery address, with the finance position for your business type. No obligation.
Thank you. Your quote is on its way.
We will come back within one business day with the machine recommendation, a written quotation for your configuration and delivery address, and the finance position for your business. Buy from the quote by phone or online.
Need it sooner? Call 07973 106612.